Change Playbacks on Audience.playback system
When you install Audience.playback you are asked to select playbacks for syncronization. If you need to modify this, follow these steps:.
Exit the playback engine.
- Go to Start > All Programs > Digimation > Audience.sync configuration. (If your Audience.sync window is visible, you can select File > Configure).
- Switch to the playback Tab.
- Delete the current playback by deleting it from the playback list and pressing the Delete button.
- Add the new playback by pressing the Add button. Type in the playback name. Note: the playback name must be entered exactly as it is named on the master Audience.foundation system. Select OK.
- Click OK at the bottom of the Audience.sync configuration menu.
- The ‘Update Playback Name’ menu will appear. Click on your new playback name and then:
- For Audience.playback.websystems, click on "Update Audience.playback.web Playback".
- For Audience.playback.sign or Audience.playback.tv systems click on Update Audience.playback.sign Playback.
- Press the Close button.
- Re-boot your playback computer.
If the Master Audience.foundation system was set to synchronize with specific playbacks, you must add the new playback to the Audience.sync settings on the Master Audience.foundation system. See Set up Audience.sync on the Master System.
Define Command and Control Triggers
Command and Control triggers are not copied from the Master Audience.foundation system profile. They must be defined locally on the playback system.
- In the playback engine ( MediaScreen ) menu bar, select File / Configure.
- Define your triggers and scripts as detailed in Command and Control.